PUMP COMPLETION CALCULATOR

(15000# stretch) (rev.2)

Line Shaft Driven Multi-stage Centrifugal Pumps

The input boxes below will calculate tube and shaft completion lengths.

** Required to achieve correct values.

 STEP #2  ** ENTER YOUR BELL NIPPLE LENGTH                    

 STEP #3  ** ENTER YOUR PUMP SHAFT LENGTH                  

Tube stickup and shaft stickup are measured from the last joint of column pipe, just before the tension joint.

 STEP #4  **  ENTER YOUR TUBE STICKUP         

 STEP #5  **  ENTER YOUR SHAFT STICKUP       

 STEP #6  **   

Bell nipple stickup above discharge head    

Shaft stickup above discharge head             

Shaft stickup above bell nipple                       

Total tube length                                                  

Total tube length with tension                             Approx. 3" STRETCH

Total shaft length                                                                  

Coupling clearance with pump set                  

Acceptable values for stickup above discharge head are:

Bell nipple = 4-9 inches.

Shaft = 17-13 inches above the bell nipple.

DISCLAIMER: Any usage or adaptation of any or all of the information provided here or on any or all of my web pages is purely at your own risk. You must take into account your own circumstances and individual or group requirements when attempting to utilize any or all of the information provided on any or all of my web pages. I assume no liability or responsibility for any results, damage, or unforeseen circumstances related in any way to the usage or adaptation of any or all of the aforementioned information.  Enjoy

COPYRIGHT © CHRIS C. AND CALL ENTERPRISES 1999-2001