| * 2"x3" .188 Rectangular Tube Main Frame And Various Supports. |
| * 2" .120 DOM Tubing Will Finish Out The Cage. |
| * 1" .095 DOM Tubing For The Dash And Safety Handles. |
| * 3/16", 1/4", 1/2", And 3/4" Plate For Various Brackets And Supports. |
| * 1/8" and 1/16" Aluminum For The Floor, Roof, Hood, Fire Walls And Body Skins. |
| * GM 350 Chevy Crate Engine For Power. |
| * Turbo 350 Transmission With Manual Valve Body And 2.75-1 1st Gear Planetary. JACKSON RACING AND PERFORMANCE. Their products can be seen here. Email him if you need something not on the list. |
| * Dana 300 Transfer Case, With 4-1 Teralow, Teraflex Rear 32 Spline Output With 1350 Rear Flange, And Custom Twin Stick. |
| * Dana 60 Front Axle, With ARB / GM 14 Bolt Rear Axle To Take The Abuse. More details coming |
| * Bilstein 5150 14" Travel Shocks. |
| * Wilwood 1" Dual Master Cylinder With Wilwood 7-1 Pedal Assembly. |
| * Danfoss Hydrostatic Steering Unit With 2"x8" Stroke Hydraulic Cylinder. |
| * Summit Racing 20 Gallon Aluminum Fuel Cell With GM Sender. |
| * 42" Super Swamper TSLs On Steel Rims With 5" Backspacing. Bead locks coming later. |
| * 2.5" TJ Rear Coils On Custom Mounts. |
| * Poison Spider Rod Ends And Threaded Inserts With Jam Nuts. |
| * Indestructible Differential Covers By Shawn. |
| * Body Brackets And Other Brackets By AA-Manufacturing. |
| * High Steer Arm By sky-manufacturing.com |
| * AARP Bolts And Stud Kits. |
| * B&M Thick Flex Plate. |
| * Headman Shorty Headers For An S10 350 Conversion. |
| * B&M Pro Stick Shifter |
| * TCI Aluminum Deep Transmission Pan |
| * RCI Harnesses |
| * Summit Racing Poly Seats |
| * NASCAR Steering Wheel With Wilwood Quick Release And Summit Center Crash Pad |
| * Summit Racing Off Road Lights. |
| * Echlin Injectors And Marine Key Switch |
| * Permacool Dual Circuit Cooler With Fan Cooling |
| * Aeroquip Anodized Aluminum And Steel Fittings and Hose |
| * Summit Racing (Griffin) Aluminum Radiator |
| * Warn 12,000 lb winch With Wireless Remote |
| * Tom Woods 1350 Rear CV Drive Shaft With Flange Mount And 1310 Front Drive Shaft |
| * Autometer Gauge Set |
| * 2ea Optima Yellow Top Batteries With 3/0 Custom Cables |
| * Brake Line Clamps and 3/16" Bender From Inline Tube |
| * Stainless Extended Brake Lines |
| * Dual exhaust system by Sparks Muffler |
| * Rear Detroit Locker and US Gears From Peak Empire Extreme Offroad |
| * Limit Straps From Rock Logic 4x4 |
| * Rear Disk Brake Brackets From Shakerbuilt.com |
| * |
| * |
| * |